dmesg - AMD Ryzen 9 5950X 16-Core
Linux version 6.5.12-300.fc39.x86_64 (mockbuild@cda4963b6857459f9d1b40ea59f8a44a) (gcc (GCC) 13.2.1 20231011 (Red Hat 13.2.1-4), GNU ld version 2.40-13.fc39) #1 SMP PREEMPT_DYNAMIC Mon Nov 20 22:44:24 UTC 2023
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d1efff] usable
BIOS-e820: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
BIOS-e820: [mem 0x000000000a20e000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000b872cfff] usable
BIOS-e820: [mem 0x00000000b872d000-0x00000000b8b35fff] reserved
BIOS-e820: [mem 0x00000000b8b36000-0x00000000b8caafff] ACPI data
BIOS-e820: [mem 0x00000000b8cab000-0x00000000ba46cfff] ACPI NVS
BIOS-e820: [mem 0x00000000ba46d000-0x00000000bb9fefff] reserved
BIOS-e820: [mem 0x00000000bb9ff000-0x00000000bcffffff] usable
BIOS-e820: [mem 0x00000000bd000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
BIOS-e820: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000203f2fffff] usable
BIOS-e820: [mem 0x000000203f300000-0x000000203fffffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0xaab68018-0xaab75867] usable ==> usable
e820: update [mem 0xaab68018-0xaab75867] usable ==> usable
e820: update [mem 0xaab49018-0xaab67257] usable ==> usable
e820: update [mem 0xaab49018-0xaab67257] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009d1efff] usable
reserve setup_data: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
reserve setup_data: [mem 0x000000000a20e000-0x000000000affffff] usable
reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
reserve setup_data: [mem 0x000000000b020000-0x00000000aab49017] usable
reserve setup_data: [mem 0x00000000aab49018-0x00000000aab67257] usable
reserve setup_data: [mem 0x00000000aab67258-0x00000000aab68017] usable
reserve setup_data: [mem 0x00000000aab68018-0x00000000aab75867] usable
reserve setup_data: [mem 0x00000000aab75868-0x00000000b872cfff] usable
reserve setup_data: [mem 0x00000000b872d000-0x00000000b8b35fff] reserved
reserve setup_data: [mem 0x00000000b8b36000-0x00000000b8caafff] ACPI data
reserve setup_data: [mem 0x00000000b8cab000-0x00000000ba46cfff] ACPI NVS
reserve setup_data: [mem 0x00000000ba46d000-0x00000000bb9fefff] reserved
reserve setup_data: [mem 0x00000000bb9ff000-0x00000000bcffffff] usable
reserve setup_data: [mem 0x00000000bd000000-0x00000000bfffffff] reserved
reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
reserve setup_data: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000203f2fffff] usable
reserve setup_data: [mem 0x000000203f300000-0x000000203fffffff] reserved
efi: EFI v2.7 by American Megatrends
efi: ACPI=0xb8caa000 ACPI 2.0=0xb8caa014 TPMFinalLog=0xba422000 SMBIOS=0xbb7ee000 SMBIOS 3.0=0xbb7ed000 MEMATTR=0xb18ac018 ESRT=0xb6bf2c18 MOKvar=0xbb84e000 RNG=0xb8c89c18 TPMEventLog=0xaab76018
random: crng init done
efi: Remove mem75: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
e820: remove [mem 0xf0000000-0xf7ffffff] reserved
efi: Remove mem76: MMIO range=[0xfd200000-0xfd2fffff] (1MB) from e820 map
e820: remove [mem 0xfd200000-0xfd2fffff] reserved
efi: Remove mem77: MMIO range=[0xfd600000-0xfd7fffff] (2MB) from e820 map
e820: remove [mem 0xfd600000-0xfd7fffff] reserved
efi: Not removing mem78: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
efi: Remove mem79: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
e820: remove [mem 0xfeb80000-0xfec01fff] reserved
efi: Not removing mem80: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
efi: Not removing mem81: MMIO range=[0xfec30000-0xfec30fff] (4KB) from e820 map
efi: Not removing mem82: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
efi: Not removing mem83: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
efi: Not removing mem84: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
efi: Not removing mem85: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
efi: Not removing mem86: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
efi: Remove mem87: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
e820: remove [mem 0xff000000-0xffffffff] reserved
secureboot: Secure boot enabled
Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7
SMBIOS 3.3.0 present.
DMI: ASUS System Product Name/TUF GAMING B550-PLUS WIFI II, BIOS 3205 08/14/2023
tsc: Fast TSC calibration using PIT
tsc: Detected 3400.115 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x203f300 max_arch_pfn = 0x400000000
total RAM covered: 3071M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 3 lose cover RAM: 0G
MTRR map: 7 entries (3 fixed + 4 variable; max 20), built from 9 variable MTRRs
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xb9e40000-0xb9e4ffff] usable ==> reserved
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
last_pfn = 0xbd000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000b6bf2c18 to 0x00000000b6bf2c50.
e820: update [mem 0xb6bf2000-0xb6bf2fff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot enabled
RAMDISK: [mem 0xaab82000-0xadec9fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000B8CAA014 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000B8CA9728 0000DC (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x00000000B8C9A000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000B8C8E000 00BE1A (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000BA452000 000040
ACPI: SSDT 0x00000000B8CA0000 008CE9 (v02 AMD AmdTable 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000B8C9C000 003B8E (v02 AMD AMD AOD 00000001 INTL 20120913)
ACPI: SSDT 0x00000000B8C9B000 0003F1 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: FIDT 0x00000000B8C8D000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000B8C6B000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: MCFG 0x00000000B8C8B000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000B8C8A000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: IVRS 0x00000000B8C88000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: TPM2 0x00000000B8C87000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
ACPI: PCCT 0x00000000B8C86000 00006E (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: SSDT 0x00000000B8C7D000 008213 (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: CRAT 0x00000000B8C7B000 001710 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: CDIT 0x00000000B8C7A000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: SSDT 0x00000000B8C78000 0015E2 (v02 AMD ArticASL 00000001 INTL 20120913)
ACPI: SSDT 0x00000000B8C77000 0002C2 (v02 AMD ArticDGP 00000001 INTL 20120913)
ACPI: SSDT 0x00000000B8C75000 0010C9 (v02 AMD ArticTPX 00000001 INTL 20120913)
ACPI: SSDT 0x00000000B8C74000 00052C (v02 AMD ArticNOI 00000001 INTL 20120913)
ACPI: SSDT 0x00000000B8C70000 003E6E (v02 AMD ArticN 00000001 INTL 20120913)
ACPI: WSMT 0x00000000B8C6F000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: APIC 0x00000000B8C6E000 00015E (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000B8C6D000 00007D (v02 AMD ArticDIS 00000001 INTL 20120913)
ACPI: SSDT 0x00000000B8C6C000 0000BF (v01 AMD AmdTable 00001000 INTL 20120913)
ACPI: Reserving FACP table memory at [mem 0xb8c9a000-0xb8c9a113]
ACPI: Reserving DSDT table memory at [mem 0xb8c8e000-0xb8c99e19]
ACPI: Reserving FACS table memory at [mem 0xba452000-0xba45203f]
ACPI: Reserving SSDT table memory at [mem 0xb8ca0000-0xb8ca8ce8]
ACPI: Reserving SSDT table memory at [mem 0xb8c9c000-0xb8c9fb8d]
ACPI: Reserving SSDT table memory at [mem 0xb8c9b000-0xb8c9b3f0]
ACPI: Reserving FIDT table memory at [mem 0xb8c8d000-0xb8c8d09b]
ACPI: Reserving FPDT table memory at [mem 0xb8c6b000-0xb8c6b043]
ACPI: Reserving MCFG table memory at [mem 0xb8c8b000-0xb8c8b03b]
ACPI: Reserving HPET table memory at [mem 0xb8c8a000-0xb8c8a037]
ACPI: Reserving IVRS table memory at [mem 0xb8c88000-0xb8c880cf]
ACPI: Reserving TPM2 table memory at [mem 0xb8c87000-0xb8c8704b]
ACPI: Reserving PCCT table memory at [mem 0xb8c86000-0xb8c8606d]
ACPI: Reserving SSDT table memory at [mem 0xb8c7d000-0xb8c85212]
ACPI: Reserving CRAT table memory at [mem 0xb8c7b000-0xb8c7c70f]
ACPI: Reserving CDIT table memory at [mem 0xb8c7a000-0xb8c7a028]
ACPI: Reserving SSDT table memory at [mem 0xb8c78000-0xb8c795e1]
ACPI: Reserving SSDT table memory at [mem 0xb8c77000-0xb8c772c1]
ACPI: Reserving SSDT table memory at [mem 0xb8c75000-0xb8c760c8]
ACPI: Reserving SSDT table memory at [mem 0xb8c74000-0xb8c7452b]
ACPI: Reserving SSDT table memory at [mem 0xb8c70000-0xb8c73e6d]
ACPI: Reserving WSMT table memory at [mem 0xb8c6f000-0xb8c6f027]
ACPI: Reserving APIC table memory at [mem 0xb8c6e000-0xb8c6e15d]
ACPI: Reserving SSDT table memory at [mem 0xb8c6d000-0xb8c6d07c]
ACPI: Reserving SSDT table memory at [mem 0xb8c6c000-0xb8c6c0be]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000203f2fffff]
NODE_DATA(0) allocated [mem 0x203f2d5000-0x203f2fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000203f2fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009d1efff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20e000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x00000000b872cfff]
node 0: [mem 0x00000000bb9ff000-0x00000000bcffffff]
node 0: [mem 0x0000000100000000-0x000000203f2fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000203f2fffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 737 pages in unavailable ranges
On node 0, zone DMA32: 14 pages in unavailable ranges
On node 0, zone DMA32: 32 pages in unavailable ranges
On node 0, zone DMA32: 13010 pages in unavailable ranges
On node 0, zone Normal: 12288 pages in unavailable ranges
On node 0, zone Normal: 3328 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09d1f000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20dfff]
PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: hibernation: Registered nosave memory: [mem 0xaab49000-0xaab49fff]
PM: hibernation: Registered nosave memory: [mem 0xaab67000-0xaab67fff]
PM: hibernation: Registered nosave memory: [mem 0xaab68000-0xaab68fff]
PM: hibernation: Registered nosave memory: [mem 0xaab75000-0xaab75fff]
PM: hibernation: Registered nosave memory: [mem 0xb6bf2000-0xb6bf2fff]
PM: hibernation: Registered nosave memory: [mem 0xb872d000-0xb8b35fff]
PM: hibernation: Registered nosave memory: [mem 0xb8b36000-0xb8caafff]
PM: hibernation: Registered nosave memory: [mem 0xb8cab000-0xba46cfff]
PM: hibernation: Registered nosave memory: [mem 0xba46d000-0xbb9fefff]
PM: hibernation: Registered nosave memory: [mem 0xbd000000-0xbfffffff]
PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xfe9fffff]
PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfec0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xffffffff]
[mem 0xc0000000-0xfe9fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
audit: enabled (after initialization)
audit: audit_backlog_limit: 8192
Unknown kernel command line parameters "rhgb BOOT_IMAGE=(hd2,gpt2)/boot/vmlinuz-6.5.12-300.fc39.x86_64", will be passed to user space.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 33000938
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
software IO TLB: area num 32.
Memory: 131559916K/134099704K available (18432K kernel code, 3267K rwdata, 14476K rodata, 4532K init, 17364K bss, 2539528K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 53614 entries in 210 pages
ftrace: allocated 210 pages with 4 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3102bbd378d, max_idle_ns: 440795361277 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.23 BogoMIPS (lpj=3400115)
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP always-on protection
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
Speculative Return Stack Overflow: IBPB-extending microcode not applied!
Speculative Return Stack Overflow: WARNING: See for mitigation options.
Speculative Return Stack Overflow: Vulnerable: Safe RET, no microcode
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 48K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=lockdown,capability,yama,selinux,bpf,landlock,integrity
Yama: becoming mindful.
SELinux: Initializing.
LSM support for eBPF active
landlock: Up and running.
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
smpboot: CPU0: AMD Ryzen 9 5950X 16-Core Processor (family: 0x19, model: 0x21, stepping: 0x2)
RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
signal: max sigframe size: 3376
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 400.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31
Spectre V2 : Update user space SMT mitigation: STIBP always-on
smp: Brought up 1 node, 32 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 32 processors activated (217607.36 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20dfff] (57344 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xb8cab000-0xba46cfff] (24911872 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 14:44:57, date: 2023-11-24
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (enabled)
audit: type=2000 audit(1700837097.176:1): state=initialized audit_enabled=1 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
cryptd: max_cpu_qlen set to 1000
raid6: skipped pq benchmark and selected avx2x4
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 12 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved as ACPI motherboard resource
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Ignoring E820 reservations for host bridge windows
ACPI: Enabled 6 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0x2040000000-0x7fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
pci 0000:01:00.0: [2646:5013] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xef100000-0xef103fff 64bit]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xef100000-0xef1fffff]
pci 0000:02:00.0: [1022:43ee] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xee9a0000-0xee9a7fff 64bit]
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.1: [1022:43eb] type 00 class 0x010601
pci 0000:02:00.1: reg 0x24: [mem 0xee980000-0xee99ffff]
pci 0000:02:00.1: reg 0x30: [mem 0xee900000-0xee97ffff pref]
pci 0000:02:00.1: enabling Extended Tags
pci 0000:02:00.1: PME# supported from D3hot D3cold
pci 0000:02:00.2: [1022:43e9] type 01 class 0x060400
pci 0000:02:00.2: enabling Extended Tags
pci 0000:02:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.2: PCI bridge to [bus 02-3a]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xe8000000-0xee9fffff]
pci 0000:00:01.2: bridge window [mem 0xd2000000-0xdabfffff 64bit pref]
pci 0000:03:00.0: [1022:43ea] type 01 class 0x060400
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:04.0: [1022:43ea] type 01 class 0x060400
pci 0000:03:04.0: enabling Extended Tags
pci 0000:03:04.0: PME# supported from D3hot D3cold
pci 0000:03:08.0: [1022:43ea] type 01 class 0x060400
pci 0000:03:08.0: enabling Extended Tags
pci 0000:03:08.0: PME# supported from D3hot D3cold
pci 0000:03:09.0: [1022:43ea] type 01 class 0x060400
pci 0000:03:09.0: enabling Extended Tags
pci 0000:03:09.0: PME# supported from D3hot D3cold
pci 0000:02:00.2: PCI bridge to [bus 03-3a]
pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
pci 0000:02:00.2: bridge window [mem 0xe8000000-0xee8fffff]
pci 0000:02:00.2: bridge window [mem 0xd2000000-0xdabfffff 64bit pref]
pci 0000:04:00.0: [8086:15ea] type 01 class 0x060400
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04-37]
pci 0000:03:00.0: bridge window [mem 0xe8000000-0xee5fffff]
pci 0000:03:00.0: bridge window [mem 0xd2000000-0xdabfffff 64bit pref]
pci 0000:05:00.0: [8086:15ea] type 01 class 0x060400
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:01.0: [8086:15ea] type 01 class 0x060400
pci 0000:05:01.0: enabling Extended Tags
pci 0000:05:01.0: supports D1 D2
pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:02.0: [8086:15ea] type 01 class 0x060400
pci 0000:05:02.0: enabling Extended Tags
pci 0000:05:02.0: supports D1 D2
pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:04.0: [8086:15ea] type 01 class 0x060400
pci 0000:05:04.0: enabling Extended Tags
pci 0000:05:04.0: supports D1 D2
pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 05-37]
pci 0000:04:00.0: bridge window [mem 0xe8000000-0xee5fffff]
pci 0000:04:00.0: bridge window [mem 0xd2000000-0xdabfffff 64bit pref]
pci 0000:06:00.0: [8086:15eb] type 00 class 0x088000
pci 0000:06:00.0: reg 0x10: [mem 0xee500000-0xee53ffff]
pci 0000:06:00.0: reg 0x14: [mem 0xee540000-0xee540fff]
pci 0000:06:00.0: enabling Extended Tags
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [mem 0xee500000-0xee5fffff]
pci 0000:05:01.0: PCI bridge to [bus 07-1e]
pci 0000:05:01.0: bridge window [mem 0xeb200000-0xee3fffff]
pci 0000:05:01.0: bridge window [mem 0xd6600000-0xdabfffff 64bit pref]
pci 0000:1f:00.0: [8086:15ec] type 00 class 0x0c0330
pci 0000:1f:00.0: reg 0x10: [mem 0xee400000-0xee40ffff]
pci 0000:1f:00.0: enabling Extended Tags
pci 0000:1f:00.0: supports D1 D2
pci 0000:1f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:1f:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:05:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
pci 0000:05:02.0: PCI bridge to [bus 1f]
pci 0000:05:02.0: bridge window [mem 0xee400000-0xee4fffff]
pci 0000:05:04.0: PCI bridge to [bus 20-37]
pci 0000:05:04.0: bridge window [mem 0xe8000000-0xeb1fffff]
pci 0000:05:04.0: bridge window [mem 0xd2000000-0xd65fffff 64bit pref]
pci 0000:38:00.0: [1987:5016] type 00 class 0x010802
pci 0000:38:00.0: reg 0x10: [mem 0xee800000-0xee803fff 64bit]
pci 0000:38:00.0: enabling Extended Tags
pci 0000:38:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
pci 0000:03:04.0: PCI bridge to [bus 38]
pci 0000:03:04.0: bridge window [mem 0xee800000-0xee8fffff]
pci 0000:39:00.0: [14c3:7961] type 00 class 0x028000
pci 0000:39:00.0: reg 0x10: [mem 0x7fffe00000-0x7fffefffff 64bit pref]
pci 0000:39:00.0: reg 0x18: [mem 0x7ffff00000-0x7ffff03fff 64bit pref]
pci 0000:39:00.0: reg 0x20: [mem 0x7ffff04000-0x7ffff04fff 64bit pref]
pci 0000:39:00.0: enabling Extended Tags
pci 0000:39:00.0: supports D1 D2
pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:08.0: PCI bridge to [bus 39]
pci 0000:03:08.0: bridge window [mem 0x7fffe00000-0x7fffffffff 64bit pref]
pci 0000:3a:00.0: [10ec:8125] type 00 class 0x020000
pci 0000:3a:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:3a:00.0: reg 0x18: [mem 0xee700000-0xee70ffff 64bit]
pci 0000:3a:00.0: reg 0x20: [mem 0xee710000-0xee713fff 64bit]
pci 0000:3a:00.0: supports D1 D2
pci 0000:3a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:09.0: PCI bridge to [bus 3a]
pci 0000:03:09.0: bridge window [io 0xf000-0xffff]
pci 0000:03:09.0: bridge window [mem 0xee700000-0xee7fffff]
pci 0000:3b:00.0: [1002:1478] type 01 class 0x060400
pci 0000:3b:00.0: reg 0x10: [mem 0xef000000-0xef003fff]
pci 0000:3b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: PCI bridge to [bus 3b-3d]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xeee00000-0xef0fffff]
pci 0000:00:03.1: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:3c:00.0: [1002:1479] type 01 class 0x060400
pci 0000:3c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:3b:00.0: PCI bridge to [bus 3c-3d]
pci 0000:3b:00.0: bridge window [io 0xe000-0xefff]
pci 0000:3b:00.0: bridge window [mem 0xeee00000-0xeeffffff]
pci 0000:3b:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:3d:00.0: [1002:73bf] type 00 class 0x030000
pci 0000:3d:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:3d:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
pci 0000:3d:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:3d:00.0: reg 0x24: [mem 0xeee00000-0xeeefffff]
pci 0000:3d:00.0: reg 0x30: [mem 0xeef00000-0xeef1ffff pref]
pci 0000:3d:00.0: BAR 0: assigned to efifb
pci 0000:3d:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:3d:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:3d:00.1: [1002:ab28] type 00 class 0x040300
pci 0000:3d:00.1: reg 0x10: [mem 0xeef20000-0xeef23fff]
pci 0000:3d:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:3c:00.0: PCI bridge to [bus 3d]
pci 0000:3c:00.0: bridge window [io 0xe000-0xefff]
pci 0000:3c:00.0: bridge window [mem 0xeee00000-0xeeffffff]
pci 0000:3c:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:3e:00.0: [1022:148a] type 00 class 0x130000
pci 0000:3e:00.0: enabling Extended Tags
pci 0000:00:07.1: PCI bridge to [bus 3e]
pci 0000:3f:00.0: [1022:1485] type 00 class 0x130000
pci 0000:3f:00.0: enabling Extended Tags
pci 0000:3f:00.1: [1022:1486] type 00 class 0x108000
pci 0000:3f:00.1: reg 0x18: [mem 0xeec00000-0xeecfffff]
pci 0000:3f:00.1: reg 0x24: [mem 0xeed08000-0xeed09fff]
pci 0000:3f:00.1: enabling Extended Tags
pci 0000:3f:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:3f:00.3: reg 0x10: [mem 0xeeb00000-0xeebfffff 64bit]
pci 0000:3f:00.3: enabling Extended Tags
pci 0000:3f:00.3: PME# supported from D0 D3hot D3cold
pci 0000:3f:00.4: [1022:1487] type 00 class 0x040300
pci 0000:3f:00.4: reg 0x10: [mem 0xeed00000-0xeed07fff]
pci 0000:3f:00.4: enabling Extended Tags
pci 0000:3f:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 3f]
pci 0000:00:08.1: bridge window [mem 0xeeb00000-0xeedfffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
efivars: Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
audit: type=1409 audit(1700837097.237:2): netlabel: auid=0 ses=0 subj=kernel nlbl_domain=(default) nlbl_protocol=unlbl res=1
audit: type=1406 audit(1700837097.237:3): netlabel: auid=0 ses=0 subj=kernel unlbl_accept=1 old=0
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:03:08.0: can't claim BAR 15 [mem 0x7fffe00000-0x7fffffffff 64bit pref]: no compatible bridge window
pci 0000:39:00.0: can't claim BAR 0 [mem 0x7fffe00000-0x7fffefffff 64bit pref]: no compatible bridge window
pci 0000:39:00.0: can't claim BAR 2 [mem 0x7ffff00000-0x7ffff03fff 64bit pref]: no compatible bridge window
pci 0000:39:00.0: can't claim BAR 4 [mem 0x7ffff04000-0x7ffff04fff 64bit pref]: no compatible bridge window
e820: reserve RAM buffer [mem 0x09d1f000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xaab49018-0xabffffff]
e820: reserve RAM buffer [mem 0xaab68018-0xabffffff]
e820: reserve RAM buffer [mem 0xb6bf2000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb872d000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x203f300000-0x203fffffff]
pci 0000:3d:00.0: vgaarb: setting as boot VGA device
pci 0000:3d:00.0: vgaarb: bridge control possible
pci 0000:3d:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: [io 0x0200-0x021f] has been reserved
pnp 00:04: [dma 0 disabled]
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] has been reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
UDP hash table entries: 65536 (order: 9, 2097152 bytes, linear)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:05:01.0: bridge window [io 0x1000-0x0fff] to [bus 07-1e] add_size 1000
pci 0000:05:04.0: bridge window [io 0x1000-0x0fff] to [bus 20-37] add_size 1000
pci 0000:04:00.0: bridge window [io 0x1000-0x0fff] to [bus 05-37] add_size 2000
pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-37] add_size 2000
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xef100000-0xef1fffff]
pci 0000:03:08.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:03:08.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:03:00.0: BAR 13: no space for [io size 0x2000]
pci 0000:03:00.0: BAR 13: failed to assign [io size 0x2000]
pci 0000:03:08.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:03:08.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:03:00.0: BAR 13: no space for [io size 0x2000]
pci 0000:03:00.0: BAR 13: failed to assign [io size 0x2000]
pci 0000:04:00.0: BAR 13: no space for [io size 0x2000]
pci 0000:04:00.0: BAR 13: failed to assign [io size 0x2000]
pci 0000:04:00.0: BAR 13: no space for [io size 0x2000]
pci 0000:04:00.0: BAR 13: failed to assign [io size 0x2000]
pci 0000:05:01.0: BAR 13: no space for [io size 0x1000]
pci 0000:05:01.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:05:04.0: BAR 13: no space for [io size 0x1000]
pci 0000:05:04.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:05:04.0: BAR 13: no space for [io size 0x1000]
pci 0000:05:04.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:05:01.0: BAR 13: no space for [io size 0x1000]
pci 0000:05:01.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [mem 0xee500000-0xee5fffff]
pci 0000:05:01.0: PCI bridge to [bus 07-1e]
pci 0000:05:01.0: bridge window [mem 0xeb200000-0xee3fffff]
pci 0000:05:01.0: bridge window [mem 0xd6600000-0xdabfffff 64bit pref]
pci 0000:05:02.0: PCI bridge to [bus 1f]
pci 0000:05:02.0: bridge window [mem 0xee400000-0xee4fffff]
pci 0000:05:04.0: PCI bridge to [bus 20-37]
pci 0000:05:04.0: bridge window [mem 0xe8000000-0xeb1fffff]
pci 0000:05:04.0: bridge window [mem 0xd2000000-0xd65fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05-37]
pci 0000:04:00.0: bridge window [mem 0xe8000000-0xee5fffff]
pci 0000:04:00.0: bridge window [mem 0xd2000000-0xdabfffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04-37]
pci 0000:03:00.0: bridge window [mem 0xe8000000-0xee5fffff]
pci 0000:03:00.0: bridge window [mem 0xd2000000-0xdabfffff 64bit pref]
pci 0000:03:04.0: PCI bridge to [bus 38]
pci 0000:03:04.0: bridge window [mem 0xee800000-0xee8fffff]
pci 0000:39:00.0: BAR 0: no space for [mem size 0x00100000 64bit pref]
pci 0000:39:00.0: BAR 0: failed to assign [mem 0x7fffe00000-0x7fffefffff 64bit pref]
pci 0000:39:00.0: BAR 2: no space for [mem size 0x00004000 64bit pref]
pci 0000:39:00.0: BAR 2: failed to assign [mem 0x7ffff00000-0x7ffff03fff 64bit pref]
pci 0000:39:00.0: BAR 4: no space for [mem size 0x00001000 64bit pref]
pci 0000:39:00.0: BAR 4: failed to assign [mem 0x7ffff04000-0x7ffff04fff 64bit pref]
pci 0000:03:08.0: PCI bridge to [bus 39]
pci 0000:03:09.0: PCI bridge to [bus 3a]
pci 0000:03:09.0: bridge window [io 0xf000-0xffff]
pci 0000:03:09.0: bridge window [mem 0xee700000-0xee7fffff]
pci 0000:02:00.2: PCI bridge to [bus 03-3a]
pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
pci 0000:02:00.2: bridge window [mem 0xe8000000-0xee8fffff]
pci 0000:02:00.2: bridge window [mem 0xd2000000-0xdabfffff 64bit pref]
pci 0000:00:01.2: PCI bridge to [bus 02-3a]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xe8000000-0xee9fffff]
pci 0000:00:01.2: bridge window [mem 0xd2000000-0xdabfffff 64bit pref]
pci 0000:3c:00.0: PCI bridge to [bus 3d]
pci 0000:3c:00.0: bridge window [io 0xe000-0xefff]
pci 0000:3c:00.0: bridge window [mem 0xeee00000-0xeeffffff]
pci 0000:3c:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:3b:00.0: PCI bridge to [bus 3c-3d]
pci 0000:3b:00.0: bridge window [io 0xe000-0xefff]
pci 0000:3b:00.0: bridge window [mem 0xeee00000-0xeeffffff]
pci 0000:3b:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 3b-3d]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xeee00000-0xef0fffff]
pci 0000:00:03.1: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 3e]
pci 0000:00:08.1: PCI bridge to [bus 3f]
pci 0000:00:08.1: bridge window [mem 0xeeb00000-0xeedfffff]
pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xefffffff window]
pci_bus 0000:00: resource 10 [mem 0x2040000000-0x7fffffffff window]
pci_bus 0000:01: resource 1 [mem 0xef100000-0xef1fffff]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xe8000000-0xee9fffff]
pci_bus 0000:02: resource 2 [mem 0xd2000000-0xdabfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xe8000000-0xee8fffff]
pci_bus 0000:03: resource 2 [mem 0xd2000000-0xdabfffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xe8000000-0xee5fffff]
pci_bus 0000:04: resource 2 [mem 0xd2000000-0xdabfffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xe8000000-0xee5fffff]
pci_bus 0000:05: resource 2 [mem 0xd2000000-0xdabfffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xee500000-0xee5fffff]
pci_bus 0000:07: resource 1 [mem 0xeb200000-0xee3fffff]
pci_bus 0000:07: resource 2 [mem 0xd6600000-0xdabfffff 64bit pref]
pci_bus 0000:1f: resource 1 [mem 0xee400000-0xee4fffff]
pci_bus 0000:20: resource 1 [mem 0xe8000000-0xeb1fffff]
pci_bus 0000:20: resource 2 [mem 0xd2000000-0xd65fffff 64bit pref]
pci_bus 0000:38: resource 1 [mem 0xee800000-0xee8fffff]
pci_bus 0000:3a: resource 0 [io 0xf000-0xffff]
pci_bus 0000:3a: resource 1 [mem 0xee700000-0xee7fffff]
pci_bus 0000:3b: resource 0 [io 0xe000-0xefff]
pci_bus 0000:3b: resource 1 [mem 0xeee00000-0xef0fffff]
pci_bus 0000:3b: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:3c: resource 0 [io 0xe000-0xefff]
pci_bus 0000:3c: resource 1 [mem 0xeee00000-0xeeffffff]
pci_bus 0000:3c: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:3d: resource 0 [io 0xe000-0xefff]
pci_bus 0000:3d: resource 1 [mem 0xeee00000-0xeeffffff]
pci_bus 0000:3d: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:3f: resource 1 [mem 0xeeb00000-0xeedfffff]
pci 0000:04:00.0: CLS mismatch (64 != 128), using 64 bytes
pci 0000:3d:00.1: D0 power state depends on 0000:3d:00.0
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
Trying to unpack rootfs image as initramfs...
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.1: Adding to iommu group 1
pci 0000:00:01.2: Adding to iommu group 2
pci 0000:00:02.0: Adding to iommu group 3
pci 0000:00:03.0: Adding to iommu group 4
pci 0000:00:03.1: Adding to iommu group 5
pci 0000:00:04.0: Adding to iommu group 6
pci 0000:00:05.0: Adding to iommu group 7
pci 0000:00:07.0: Adding to iommu group 8
pci 0000:00:07.1: Adding to iommu group 9
pci 0000:00:08.0: Adding to iommu group 10
pci 0000:00:08.1: Adding to iommu group 11
pci 0000:00:14.0: Adding to iommu group 12
pci 0000:00:14.3: Adding to iommu group 12
pci 0000:00:18.0: Adding to iommu group 13
pci 0000:00:18.1: Adding to iommu group 13
pci 0000:00:18.2: Adding to iommu group 13
pci 0000:00:18.3: Adding to iommu group 13
pci 0000:00:18.4: Adding to iommu group 13
pci 0000:00:18.5: Adding to iommu group 13
pci 0000:00:18.6: Adding to iommu group 13
pci 0000:00:18.7: Adding to iommu group 13
pci 0000:01:00.0: Adding to iommu group 14
pci 0000:02:00.0: Adding to iommu group 15
pci 0000:02:00.1: Adding to iommu group 15
pci 0000:02:00.2: Adding to iommu group 15
pci 0000:03:00.0: Adding to iommu group 15
pci 0000:03:04.0: Adding to iommu group 15
pci 0000:03:08.0: Adding to iommu group 15
pci 0000:03:09.0: Adding to iommu group 15
pci 0000:04:00.0: Adding to iommu group 15
pci 0000:05:00.0: Adding to iommu group 15
pci 0000:05:01.0: Adding to iommu group 15
pci 0000:05:02.0: Adding to iommu group 15
pci 0000:05:04.0: Adding to iommu group 15
pci 0000:06:00.0: Adding to iommu group 15
pci 0000:1f:00.0: Adding to iommu group 15
pci 0000:38:00.0: Adding to iommu group 15
pci 0000:39:00.0: Adding to iommu group 15
pci 0000:3a:00.0: Adding to iommu group 15
pci 0000:3b:00.0: Adding to iommu group 16
pci 0000:3c:00.0: Adding to iommu group 17
pci 0000:3d:00.0: Adding to iommu group 18
pci 0000:3d:00.1: Adding to iommu group 19
pci 0000:3e:00.0: Adding to iommu group 20
pci 0000:3f:00.0: Adding to iommu group 21
pci 0000:3f:00.1: Adding to iommu group 22
pci 0000:3f:00.3: Adding to iommu group 23
pci 0000:3f:00.4: Adding to iommu group 24
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000a6b49000-0x00000000aab49000] (64MB)
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
amd_uncore: 4 amd_df counters detected
amd_uncore: 6 amd_l3 counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=25 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
NET: Registered PF_ALG protocol family
xor: automatically using best checksumming function avx
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 52512K
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:01.1: PME: Signaling with IRQ 28
pcieport 0000:00:01.1: AER: enabled with IRQ 28
pcieport 0000:00:01.2: PME: Signaling with IRQ 29
pcieport 0000:00:01.2: AER: enabled with IRQ 29
pcieport 0000:00:03.1: PME: Signaling with IRQ 30
pcieport 0000:00:03.1: AER: enabled with IRQ 30
pcieport 0000:00:07.1: PME: Signaling with IRQ 32
pcieport 0000:00:07.1: AER: enabled with IRQ 32
pcieport 0000:00:08.1: PME: Signaling with IRQ 33
pcieport 0000:00:08.1: AER: enabled with IRQ 33
pcieport 0000:05:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
pcieport 0000:05:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
Estimated ratio of average max frequency by base frequency (times 1024): 1277
Monitor-Mwait will be used to enter C-1 state
ACPI: \_SB_.PLTF.C000: Found 2 idle states
ACPI: \_SB_.PLTF.C002: Found 2 idle states
ACPI: \_SB_.PLTF.C004: Found 2 idle states
ACPI: \_SB_.PLTF.C006: Found 2 idle states
ACPI: \_SB_.PLTF.C008: Found 2 idle states
ACPI: \_SB_.PLTF.C00A: Found 2 idle states
ACPI: \_SB_.PLTF.C00C: Found 2 idle states
ACPI: \_SB_.PLTF.C00E: Found 2 idle states
ACPI: \_SB_.PLTF.C010: Found 2 idle states
ACPI: \_SB_.PLTF.C012: Found 2 idle states
ACPI: \_SB_.PLTF.C014: Found 2 idle states
ACPI: \_SB_.PLTF.C016: Found 2 idle states
ACPI: \_SB_.PLTF.C018: Found 2 idle states
ACPI: \_SB_.PLTF.C01A: Found 2 idle states
ACPI: \_SB_.PLTF.C01C: Found 2 idle states
ACPI: \_SB_.PLTF.C01E: Found 2 idle states
ACPI: \_SB_.PLTF.C001: Found 2 idle states
ACPI: \_SB_.PLTF.C003: Found 2 idle states
ACPI: \_SB_.PLTF.C005: Found 2 idle states
ACPI: \_SB_.PLTF.C007: Found 2 idle states
ACPI: \_SB_.PLTF.C009: Found 2 idle states
ACPI: \_SB_.PLTF.C00B: Found 2 idle states
ACPI: \_SB_.PLTF.C00D: Found 2 idle states
ACPI: \_SB_.PLTF.C00F: Found 2 idle states
ACPI: \_SB_.PLTF.C011: Found 2 idle states
ACPI: \_SB_.PLTF.C013: Found 2 idle states
ACPI: \_SB_.PLTF.C015: Found 2 idle states
ACPI: \_SB_.PLTF.C017: Found 2 idle states
ACPI: \_SB_.PLTF.C019: Found 2 idle states
ACPI: \_SB_.PLTF.C01B: Found 2 idle states
ACPI: \_SB_.PLTF.C01D: Found 2 idle states
ACPI: \_SB_.PLTF.C01F: Found 2 idle states
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_crb MSFT0101:00: Disabling hwrng
ACPI: bus type drm_connector registered
[drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
fbcon: Deferring console take-over
simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
ahci 0000:02:00.1: version 3.0
ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.1: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m131072@0xee980000 port 0xee980100 irq 45
ata2: SATA max UDMA/133 abar m131072@0xee980000 port 0xee980180 irq 45
ata3: SATA max UDMA/133 abar m131072@0xee980000 port 0xee980200 irq 45
ata4: SATA max UDMA/133 abar m131072@0xee980000 port 0xee980280 irq 45
ata5: SATA max UDMA/133 abar m131072@0xee980000 port 0xee980300 irq 45
ata6: SATA max UDMA/133 abar m131072@0xee980000 port 0xee980380 irq 45
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000200000410
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.5.12-300.fc39.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:02:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.5.12-300.fc39.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:1f:00.0: xHCI Host Controller
xhci_hcd 0000:1f:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:1f:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
xhci_hcd 0000:1f:00.0: xHCI Host Controller
xhci_hcd 0000:1f:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:1f:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.5.12-300.fc39.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:1f:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.5.12-300.fc39.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:1f:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:3f:00.3: xHCI Host Controller
xhci_hcd 0000:3f:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:3f:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000200000410
xhci_hcd 0000:3f:00.3: xHCI Host Controller
xhci_hcd 0000:3f:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:3f:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 6.5.12-300.fc39.x86_64 xhci-hcd
usb usb5: SerialNumber: 0000:3f:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 6.5.12-300.fc39.x86_64 xhci-hcd
usb usb6: SerialNumber: 0000:3f:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2023-11-24T14:44:58 UTC (1700837098)
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
ata1: SATA link down (SStatus 0 SControl 330)
usb 5-3: new high-speed USB device number 2 using xhci_hcd
usb 1-2: new high-speed USB device number 2 using xhci_hcd
usb 5-3: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.39
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3: Product: USB2.1 Hub
usb 5-3: Manufacturer: Generic
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
mip6: Mobile IPv6
NET: Registered PF_PACKET protocol family
microcode: CPU2: patch_level=0x0a20120a
microcode: CPU4: patch_level=0x0a20120a
microcode: CPU0: patch_level=0x0a20120a
microcode: CPU5: patch_level=0x0a20120a
microcode: CPU3: patch_level=0x0a20120a
microcode: CPU1: patch_level=0x0a20120a
microcode: CPU6: patch_level=0x0a20120a
microcode: CPU9: patch_level=0x0a20120a
microcode: CPU8: patch_level=0x0a20120a
microcode: CPU7: patch_level=0x0a20120a
microcode: CPU14: patch_level=0x0a20120a
microcode: CPU15: patch_level=0x0a20120a
microcode: CPU10: patch_level=0x0a20120a
microcode: CPU11: patch_level=0x0a20120a
microcode: CPU19: patch_level=0x0a20120a
microcode: CPU12: patch_level=0x0a20120a
microcode: CPU18: patch_level=0x0a20120a
microcode: CPU13: patch_level=0x0a20120a
microcode: CPU22: patch_level=0x0a20120a
microcode: CPU16: patch_level=0x0a20120a
microcode: CPU23: patch_level=0x0a20120a
microcode: CPU24: patch_level=0x0a20120a
microcode: CPU25: patch_level=0x0a20120a
microcode: CPU20: patch_level=0x0a20120a
microcode: CPU17: patch_level=0x0a20120a
microcode: CPU26: patch_level=0x0a20120a
microcode: CPU21: patch_level=0x0a20120a
microcode: CPU27: patch_level=0x0a20120a
microcode: CPU28: patch_level=0x0a20120a
microcode: CPU30: patch_level=0x0a20120a
microcode: CPU29: patch_level=0x0a20120a
microcode: CPU31: patch_level=0x0a20120a
microcode: Microcode Update Driver: v2.2.
resctrl: L3 allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (1266152648, 288237494)->(1687733905, -133343763)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 2d719b71d7ce13a5dfb092a6f464a08d3a63afe0'
page_owner is disabled
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, zoned=yes, fsverity=yes
Key type big_key registered
Key type trusted registered
Key type encrypted registered
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Problem loading X.509 certificate -126
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Loaded X.509 cert 'Fedora Secure Boot CA: fde32599c2d61db1bf5807335d7b20e4cd963b42'
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Problem loading X.509 certificate -126
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Loaded X.509 cert 'Luis Jesus Diaz Manzo: 0936696dab29cd80e62a110cd43b5a88efb8a6ba'
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Problem loading X.509 certificate -126
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Loaded X.509 cert 'Luis Jesus Diaz Manzo: b9287a12fbe9a948911d2a1193883bad1f700e41'
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 2d719b71d7ce13a5dfb092a6f464a08d3a63afe0'
ima: Allocated hash algorithm: sha256
hub 5-3:1.0: USB hub found
hub 5-3:1.0: 5 ports detected
audit: type=1807 audit(1700837098.963:4): action=measure func=KEXEC_KERNEL_CHECK res=1
audit: type=1807 audit(1700837098.963:5): action=measure func=MODULE_CHECK res=1
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor (disabled)
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
alg: No test for 842 (842-scomp)
alg: No test for 842 (842-generic)
usb 1-2: New USB device found, idVendor=2109, idProduct=2822, bcdDevice=90.14
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: USB2.0 Hub
usb 1-2: Manufacturer: VIA Labs, Inc.
usb 1-2: SerialNumber: 000000001
usb 6-3: new SuperSpeed USB device number 2 using xhci_hcd
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 6-3: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.39
usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-3: Product: USB3.2 Hub
usb 6-3: Manufacturer: Generic
ata2: SATA link down (SStatus 0 SControl 330)
hub 6-3:1.0: USB hub found
hub 6-3:1.0: 2 ports detected
PM: Magic number: 15:5:739
audit: type=1334 audit(1700837099.069:6): prog-id=1 op=LOAD
audit: type=1334 audit(1700837099.070:7): prog-id=2 op=LOAD
RAS: Correctable Errors collector initialized.
Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7
clk: Disabling unused clocks
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=046d, idProduct=085e, bcdDevice= 3.17
usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=3
usb 2-1: Product: Logitech BRIO
usb 2-1: SerialNumber: 3172AEB0
input: Logitech BRIO Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb2/2-1/2-1:1.5/0003:046D:085E.0001/input/input2
usb 5-4: new high-speed USB device number 3 using xhci_hcd
hid-generic 0003:046D:085E.0001: input,hidraw0: USB HID v1.11 Device [Logitech BRIO] on usb-0000:02:00.0-1/input5
tsc: Refined TSC clocksource calibration: 3399.998 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31024cfe468, max_idle_ns: 440795307017 ns
clocksource: Switched to clocksource tsc
usb 5-4: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00
usb 5-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-4: Product: USB2.0 HUB
hub 5-4:1.0: USB hub found
hub 5-4:1.0: 4 ports detected
usb 5-3.5: new high-speed USB device number 4 using xhci_hcd
usb 5-3.5: New USB device found, idVendor=0bda, idProduct=1100, bcdDevice= 1.01
usb 5-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3.5: Product: HID Device
usb 5-3.5: Manufacturer: Realtek
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-10: TOSHIBA MG08ACA16TE, 0103, max UDMA/133
ata3.00: 31251759104 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: Features: NCQ-prio
hid-generic 0003:0BDA:1100.0002: hiddev96,hidraw1: USB HID v1.11 Device [Realtek HID Device] on usb-0000:3f:00.3-3.5/input0
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA TOSHIBA MG08ACA1 0103 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 31251759104 512-byte logical blocks: (16.0 TB/14.6 TiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
usb 5-4.1: new high-speed USB device number 5 using xhci_hcd
usb 5-4.1: New USB device found, idVendor=18a5, idProduct=0428, bcdDevice= 1.cd
usb 5-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-4.1: Product: Verbatim 4K BD RW
usb 5-4.1: Manufacturer: Verbatim
usb 5-4.1: SerialNumber: 0023064C116D
usb 2-2: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd
usb 5-4.3: new high-speed USB device number 6 using xhci_hcd
usb 5-4.3: New USB device found, idVendor=1908, idProduct=0226, bcdDevice= 1.11
usb 5-4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: ATA-10: CT4000MX500SSD1, M3CR046, max UDMA/133
ata4.00: 7814037168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata4.00: Features: Trust Dev-Sleep
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA CT4000MX500SSD1 046 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 3:0:0:0: [sdb] 4096-byte physical blocks
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
sdb: sdb1 sdb2 sdb3
sd 3:0:0:0: [sdb] supports TCG Opal
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 2-2: New USB device found, idVendor=2109, idProduct=0822, bcdDevice=90.14
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: USB3.1 Hub
usb 2-2: Manufacturer: VIA Labs, Inc.
usb 2-2: SerialNumber: 000000001
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 1-5: new high-speed USB device number 3 using xhci_hcd
usb 1-5: New USB device found, idVendor=13d3, idProduct=3563, bcdDevice= 1.00
usb 1-5: New USB device strings: Mfr=5, Product=6, SerialNumber=7
usb 1-5: Product: Wireless_Device
usb 1-5: Manufacturer: MediaTek Inc.
usb 1-5: SerialNumber: 000000000
usb 1-6: new full-speed USB device number 4 using xhci_hcd
ata5: failed to resume link (SControl 0)
ata5: SATA link down (SStatus 0 SControl 0)
usb 1-6: config 1 has an invalid interface number: 2 but max is 1
usb 1-6: config 1 has no interface number 1
usb 1-6: New USB device found, idVendor=0b05, idProduct=1939, bcdDevice= 1.00
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: AURA LED Controller
usb 1-6: Manufacturer: AsusTek Computer Inc.
usb 1-6: SerialNumber: 9876543210
usb 1-2.1: new high-speed USB device number 5 using xhci_hcd
hid-generic 0003:0B05:1939.0003: hiddev97,hidraw2: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:02:00.0-6/input2
usb 1-2.1: New USB device found, idVendor=152a, idProduct=85dd, bcdDevice= 1.04
usb 1-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-2.1: Product: SMSL USB AUDIO
usb 1-2.1: Manufacturer: SMSL
usb 2-2.3: new SuperSpeed USB device number 4 using xhci_hcd
usb 2-2.3: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 3.c3
usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2.3: Product: USB3.0 Hub
usb 2-2.3: Manufacturer: VIA Labs, Inc.
hub 2-2.3:1.0: USB hub found
hub 2-2.3:1.0: 4 ports detected
usb 1-7: new high-speed USB device number 6 using xhci_hcd
usb 1-7: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.90
usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-7: Product: USB2.0 Hub
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
usb 1-2.2: new full-speed USB device number 7 using xhci_hcd
ata6: failed to resume link (SControl 0)
ata6: SATA link down (SStatus 0 SControl 0)
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 4532K
Write protecting the kernel read-only data: 34816k
Freeing unused kernel image (rodata/data gap) memory: 1908K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
rhgb
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=(hd2,gpt2)/boot/vmlinuz-6.5.12-300.fc39.x86_64
audit: type=1334 audit(1700837102.122:8): prog-id=1 op=UNLOAD
systemd[1]: systemd 254.5-2.fc39 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initrd.
systemd[1]: Hostname set to .
audit: type=1334 audit(1700837102.146:9): prog-id=3 op=LOAD
audit: type=1300 audit(1700837102.146:9): arch=c000003e syscall=321 success=yes exit=8 a0=5 a1=7ffdb805e5d0 a2=90 a3=0 items=0 ppid=0 pid=1 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="systemd" exe="/usr/lib/systemd/systemd" subj=kernel key=(null)
usb 1-2.2: New USB device found, idVendor=0d8c, idProduct=0170, bcdDevice= 0.00
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Advanced Audio Device
usb 1-2.2: Manufacturer: C-Media Electronics Inc.
input: C-Media Electronics Inc. USB Advanced Audio Device as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.2/1-2.2:1.3/0003:0D8C:0170.0004/input/input3
usb 1-9: new high-speed USB device number 8 using xhci_hcd
hid-generic 0003:0D8C:0170.0004: input,hidraw3: USB HID v1.00 Device [C-Media Electronics Inc. USB Advanced Audio Device] on usb-0000:02:00.0-2.2/input3
systemd[1]: bpf-lsm: LSM BPF program attached
systemd[1]: Queued start job for default target initrd.target.
systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target swap.target - Swaps.
systemd[1]: Reached target timers.target - Timer Units.
systemd[1]: Listening on dbus.socket - D-Bus System Message Bus Socket.
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Reached target sockets.target - Socket Units.
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: memstrack.service - Memstrack Anylazing Service was skipped because no trigger condition checks were met.
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: Starting systemd-sysusers.service - Create System Users...
systemd[1]: Starting systemd-vconsole-setup.service - Virtual Console Setup...
i2c_dev: i2c /dev entries driver
systemd-journald[510]: Collecting audit messages is disabled.
nct6775: Found NCT6798D or compatible chip at 0x2e:0x290
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
systemd[1]: Finished systemd-sysusers.service - Create System Users.
systemd[1]: Finished systemd-vconsole-setup.service - Virtual Console Setup.
systemd[1]: dracut-cmdline-ask.service - dracut ask for additional cmdline parameters was skipped because no trigger condition checks were met.
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
fuse: init (API version 7.38)
systemd[1]: Starting dracut-cmdline.service - dracut cmdline hook...
systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
systemd[1]: Started systemd-journald.service - Journal Service.
usb 1-9: New USB device found, idVendor=2001, idProduct=331b, bcdDevice= 0.00
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-9: Manufacturer: Realtek
usb 1-9: SerialNumber: 085A11329E20
usb 2-2.3.2: new SuperSpeed USB device number 5 using xhci_hcd
usb 2-2.3.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
usb 2-2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 2-2.3.2: Product: USB 10/100/1000 LAN
usb 2-2.3.2: Manufacturer: Realtek
usb 2-2.3.2: SerialNumber: 001000001
usbcore: registered new device driver r8152-cfgselector
usb 1-2.3: new high-speed USB device number 9 using xhci_hcd
acpi PNP0C14:03: duplicate WMI GUID 97845ED0-4E6D-11DE-8A39-0800200C9A66 (first instance was on PNP0C14:00)
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
ccp 0000:3f:00.1: enabling device (0000 -> 0002)
usb-storage 5-4.1:1.0: USB Mass Storage device detected
scsi host6: usb-storage 5-4.1:1.0
ccp 0000:3f:00.1: ccp: unable to access the device: you might be running a broken BIOS.
ccp 0000:3f:00.1: psp enabled
usb-storage 5-4.3:1.0: USB Mass Storage device detected
scsi host7: usb-storage 5-4.3:1.0
usbcore: registered new interface driver usb-storage
nvme nvme0: pci function 0000:01:00.0
nvme nvme1: pci function 0000:38:00.0
usbcore: registered new interface driver uas
nvme nvme0: Shutdown timeout set to 10 seconds
nvme nvme1: Shutdown timeout set to 10 seconds
nvme nvme1: 8/0/0 default/read/poll queues
nvme nvme1: Ignoring bogus Namespace Identifiers
nvme nvme0: 32/0/0 default/read/poll queues
nvme1n1: p1 p2 p3 p4 p5 p6
nvme0n1: p1 p2 p3 p4 p5 p6
AMD-Vi: AMD IOMMUv2 loaded and initialized
usb 1-2.3: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 3.c3
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB2.0 Hub
usb 1-2.3: Manufacturer: VIA Labs, Inc.
hub 1-2.3:1.0: USB hub found
hub 1-2.3:1.0: 5 ports detected
EXT4-fs (nvme0n1p2): mounted filesystem 77912ad4-ac6d-4191-9403-e7833e0d9cbe ro with ordered data mode. Quota mode: none.
usb 1-10: new full-speed USB device number 10 using xhci_hcd
r8152-cfgselector 2-2.3.2: reset SuperSpeed USB device number 5 using xhci_hcd
usb 1-10: New USB device found, idVendor=0b05, idProduct=1a83, bcdDevice= 3.27
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: ROG AZOTH
usb 1-10: Manufacturer: ASUSTeK
usb 1-10: SerialNumber: N9MPGDD13076
input: ASUSTeK ROG AZOTH as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-10/1-10:1.0/0003:0B05:1A83.0005/input/input4
r8152 2-2.3.2:1.0: load rtl8153b-2 v2 04/27/23 successfully
r8152 2-2.3.2:1.0 eth0: v1.12.13
usbcore: registered new interface driver r8152
hid-generic 0003:0B05:1A83.0005: input,hidraw4: USB HID v1.11 Keyboard [ASUSTeK ROG AZOTH] on usb-0000:02:00.0-10/input0
hid-generic 0003:0B05:1A83.0006: hiddev98,hidraw5: USB HID v1.11 Device [ASUSTeK ROG AZOTH] on usb-0000:02:00.0-10/input1
input: ASUSTeK ROG AZOTH Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-10/1-10:1.2/0003:0B05:1A83.0007/input/input5
input: ASUSTeK ROG AZOTH System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-10/1-10:1.2/0003:0B05:1A83.0007/input/input6
input: ASUSTeK ROG AZOTH as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-10/1-10:1.2/0003:0B05:1A83.0007/input/input7
input: ASUSTeK ROG AZOTH Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-10/1-10:1.2/0003:0B05:1A83.0007/input/input8
hid-generic 0003:0B05:1A83.0007: input,hiddev99,hidraw6: USB HID v1.11 Mouse [ASUSTeK ROG AZOTH] on usb-0000:02:00.0-10/input2
input: ASUSTeK ROG AZOTH as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-10/1-10:1.3/0003:0B05:1A83.0008/input/input9
hid-generic 0003:0B05:1A83.0008: input,hidraw7: USB HID v1.11 Keyboard [ASUSTeK ROG AZOTH] on usb-0000:02:00.0-10/input3
usb 1-2.3.1: new full-speed USB device number 11 using xhci_hcd
scsi 7:0:0:0: Direct-Access Generic Mass-Storage 1.11 PQ: 0 ANSI: 2
sd 7:0:0:0: Attached scsi generic sg2 type 0
scsi 6:0:0:0: CD-ROM PIONEER BD-RW BDR-UD04 1.14 PQ: 0 ANSI: 0
sr 6:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg3 type 5
usb 1-2.3.1: New USB device found, idVendor=046d, idProduct=c539, bcdDevice=39.06
usb 1-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3.1: Product: USB Receiver
usb 1-2.3.1: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3.1/1-2.3.1:1.0/0003:046D:C539.0009/input/input10
sd 7:0:0:0: [sdc] Media removed, stopped polling
sd 7:0:0:0: [sdc] Attached SCSI removable disk
hid-generic 0003:046D:C539.0009: input,hidraw8: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:02:00.0-2.3.1/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3.1/1-2.3.1:1.1/0003:046D:C539.000A/input/input11
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3.1/1-2.3.1:1.1/0003:046D:C539.000A/input/input12
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3.1/1-2.3.1:1.1/0003:046D:C539.000A/input/input13
hid-generic 0003:046D:C539.000A: input,hiddev100,hidraw9: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:02:00.0-2.3.1/input1
hid-generic 0003:046D:C539.000B: hiddev101,hidraw10: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.0-2.3.1/input2
[drm] amdgpu kernel modesetting enabled.
r8152 2-2.3.2:1.0 enp2s0f0u2u3u2: renamed from eth0
amdgpu: CRAT table disabled by module option
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
[drm] initializing kernel modesetting (SIENNA_CICHLID 0x1002:0x73BF 0x1462:0x3961 0xC3).
[drm] register mmio base: 0xEEE00000
[drm] register mmio size: 1048576
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
[drm] add ip block number 9
amdgpu 0000:3d:00.0: No more image in the PCI ROM
amdgpu 0000:3d:00.0: amdgpu: Fetched VBIOS from ROM BAR
amdgpu: ATOM BIOS: 113-V396TRIO-2OC
r8169 0000:3a:00.0 eth0: RTL8125B, 50:eb:f6:29:4f:7a, XID 641, IRQ 110
r8169 0000:3a:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
r8169 0000:3a:00.0 enp58s0: renamed from eth0
[drm] VCN(0) decode is enabled in VM mode
[drm] VCN(1) decode is enabled in VM mode
[drm] VCN(0) encode is enabled in VM mode
[drm] VCN(1) encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
amdgpu 0000:3d:00.0: vgaarb: deactivate vga console
amdgpu 0000:3d:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
amdgpu 0000:3d:00.0: amdgpu: MEM ECC is not presented.
amdgpu 0000:3d:00.0: amdgpu: SRAM ECC is not presented.
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:3d:00.0: BAR 2: releasing [mem 0xd0000000-0xd01fffff 64bit pref]
amdgpu 0000:3d:00.0: BAR 0: releasing [mem 0xc0000000-0xcfffffff 64bit pref]
pcieport 0000:3c:00.0: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref]
pcieport 0000:3b:00.0: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref]
pcieport 0000:00:03.1: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref]
pcieport 0000:00:03.1: BAR 15: assigned [mem 0x2200000000-0x27ffffffff 64bit pref]
pcieport 0000:3b:00.0: BAR 15: assigned [mem 0x2200000000-0x27ffffffff 64bit pref]
pcieport 0000:3c:00.0: BAR 15: assigned [mem 0x2200000000-0x27ffffffff 64bit pref]
amdgpu 0000:3d:00.0: BAR 0: assigned [mem 0x2400000000-0x27ffffffff 64bit pref]
amdgpu 0000:3d:00.0: BAR 2: assigned [mem 0x2200000000-0x22001fffff 64bit pref]
pcieport 0000:00:03.1: PCI bridge to [bus 3b-3d]
pcieport 0000:00:03.1: bridge window [io 0xe000-0xefff]
pcieport 0000:00:03.1: bridge window [mem 0xeee00000-0xef0fffff]
pcieport 0000:00:03.1: bridge window [mem 0x2200000000-0x27ffffffff 64bit pref]
pcieport 0000:3b:00.0: PCI bridge to [bus 3c-3d]
pcieport 0000:3b:00.0: bridge window [io 0xe000-0xefff]
pcieport 0000:3b:00.0: bridge window [mem 0xeee00000-0xeeffffff]
pcieport 0000:3b:00.0: bridge window [mem 0x2200000000-0x27ffffffff 64bit pref]
pcieport 0000:3c:00.0: PCI bridge to [bus 3d]
pcieport 0000:3c:00.0: bridge window [io 0xe000-0xefff]
pcieport 0000:3c:00.0: bridge window [mem 0xeee00000-0xeeffffff]
pcieport 0000:3c:00.0: bridge window [mem 0x2200000000-0x27ffffffff 64bit pref]
amdgpu 0000:3d:00.0: amdgpu: VRAM: 16368M 0x0000008000000000 - 0x00000083FEFFFFFF (16368M used)
amdgpu 0000:3d:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
amdgpu 0000:3d:00.0: amdgpu: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=16368M, BAR=16384M
[drm] RAM width 256bits GDDR6
[drm] amdgpu: 16368M of VRAM memory ready
[drm] amdgpu: 64340M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x0000008000300000).
usb 1-2.3.3: new full-speed USB device number 12 using xhci_hcd
BTRFS: device label mg08 devid 1 transid 3803 /dev/sda1 scanned by (udev-worker) (639)
usb 1-2.3.3: New USB device found, idVendor=0b05, idProduct=1a85, bcdDevice= 3.17
usb 1-2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.3.3: Product: ROG AZOTH
usb 1-2.3.3: Manufacturer: ASUSTeK
usb 1-2.3.3: SerialNumber: N9MPGDD13076
input: ASUSTeK ROG AZOTH as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.0/0003:0B05:1A85.000C/input/input15
hid-generic 0003:0B05:1A85.000C: input,hidraw11: USB HID v1.11 Keyboard [ASUSTeK ROG AZOTH] on usb-0000:02:00.0-2.3.3/input0
hid-generic 0003:0B05:1A85.000D: hiddev102,hidraw12: USB HID v1.11 Device [ASUSTeK ROG AZOTH] on usb-0000:02:00.0-2.3.3/input1
input: ASUSTeK ROG AZOTH Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.2/0003:0B05:1A85.000E/input/input16
input: ASUSTeK ROG AZOTH System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.2/0003:0B05:1A85.000E/input/input17
input: ASUSTeK ROG AZOTH as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.2/0003:0B05:1A85.000E/input/input18
input: ASUSTeK ROG AZOTH Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.2/0003:0B05:1A85.000E/input/input19
hid-generic 0003:0B05:1A85.000E: input,hiddev103,hidraw13: USB HID v1.11 Mouse [ASUSTeK ROG AZOTH] on usb-0000:02:00.0-2.3.3/input2
input: ASUSTeK ROG AZOTH as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.3/0003:0B05:1A85.000F/input/input20
hid-generic 0003:0B05:1A85.000F: input,hidraw14: USB HID v1.11 Keyboard [ASUSTeK ROG AZOTH] on usb-0000:02:00.0-2.3.3/input3
usb 1-2.3.5: new high-speed USB device number 13 using xhci_hcd
usb 1-2.3.5: New USB device found, idVendor=2109, idProduct=8888, bcdDevice= 0.01
usb 1-2.3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.3.5: Product: USB Billboard Device
usb 1-2.3.5: Manufacturer: VIA Labs, Inc.
usb 1-2.3.5: SerialNumber: 0000000000000001
logitech-djreceiver 0003:046D:C539.0009: hidraw8: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:02:00.0-2.3.1/input0
logitech-djreceiver 0003:046D:C539.000A: hiddev100,hidraw9: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:02:00.0-2.3.1/input1
logitech-djreceiver 0003:046D:C539.000B: hiddev101,hidraw10: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.0-2.3.1/input2
logitech-djreceiver 0003:046D:C539.000B: device of type eQUAD Lightspeed 1 (0x0c) connected on slot 1
input: Logitech Wireless Mouse PID:4085 Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3.1/1-2.3.1:1.2/0003:046D:C539.000B/0003:046D:4085.0010/input/input21
input: Logitech Wireless Mouse PID:4085 Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3.1/1-2.3.1:1.2/0003:046D:C539.000B/0003:046D:4085.0010/input/input22
hid-generic 0003:046D:4085.0010: input,hidraw15: USB HID v1.11 Keyboard [Logitech Wireless Mouse PID:4085] on usb-0000:02:00.0-2.3.1/input2:1
input: Logitech G604 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3.1/1-2.3.1:1.2/0003:046D:C539.000B/0003:046D:4085.0010/input/input26
logitech-hidpp-device 0003:046D:4085.0010: input,hidraw15: USB HID v1.11 Keyboard [Logitech G604 ] on usb-0000:02:00.0-2.3.1/input2:1
amdgpu 0000:3d:00.0: amdgpu: STB initialized to 2048 entries
i2c i2c-1: adapter quirk: no zero length (addr 0x0018, size 0, write)
i2c i2c-1: adapter quirk: no zero length (addr 0x0019, size 0, write)
i2c i2c-1: adapter quirk: no zero length (addr 0x001a, size 0, write)
i2c i2c-1: adapter quirk: no zero length (addr 0x001b, size 0, write)
i2c i2c-1: adapter quirk: no zero length (addr 0x001c, size 0, write)
i2c i2c-1: adapter quirk: no zero length (addr 0x001d, size 0, write)
i2c i2c-1: adapter quirk: no zero length (addr 0x001e, size 0, write)
i2c i2c-1: adapter quirk: no zero length (addr 0x001f, size 0, write)
i2c i2c-2: adapter quirk: no zero length (addr 0x0018, size 0, write)
i2c i2c-2: adapter quirk: no zero length (addr 0x0019, size 0, write)
[drm] Loading DMUB firmware via PSP: version=0x02020020
[drm] use_doorbell being set to: [true]
[drm] use_doorbell being set to: [true]
[drm] use_doorbell being set to: [true]
[drm] use_doorbell being set to: [true]
[drm] Found VCN firmware Version ENC: 1.29 DEC: 2 VEP: 0 Revision: 2
amdgpu 0000:3d:00.0: amdgpu: Will use PSP to load VCN firmware
[drm] reserve 0xa00000 from 0x83fd000000 for PSP TMR
amdgpu 0000:3d:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu 0000:3d:00.0: amdgpu: smu driver if version = 0x00000040, smu fw if version = 0x00000041, smu fw program = 0, version = 0x003a5800 (58.88.0)
amdgpu 0000:3d:00.0: amdgpu: SMU driver if version not matched
amdgpu 0000:3d:00.0: amdgpu: use vbios provided pptable
amdgpu 0000:3d:00.0: amdgpu: SMU is initialized successfully!
[drm] Display Core v3.2.241 initialized on DCN 3.0
[drm] DP-HDMI FRL PCON supported
[drm] DMUB hardware initialized: version=0x02020020
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
amdgpu: HMM registered 16368MB device memory
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x73bf:0x1002]
kfd kfd: amdgpu: added device 1002:73bf
amdgpu 0000:3d:00.0: amdgpu: SE 4, SH per SE 2, CU per SH 10, active_cu_number 60
amdgpu 0000:3d:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring sdma2 uses VM inv eng 14 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring sdma3 uses VM inv eng 15 on hub 0
amdgpu 0000:3d:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 8
amdgpu 0000:3d:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 8
amdgpu 0000:3d:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 8
amdgpu 0000:3d:00.0: amdgpu: ring vcn_dec_1 uses VM inv eng 5 on hub 8
amdgpu 0000:3d:00.0: amdgpu: ring vcn_enc_1.0 uses VM inv eng 6 on hub 8
amdgpu 0000:3d:00.0: amdgpu: ring vcn_enc_1.1 uses VM inv eng 7 on hub 8
amdgpu 0000:3d:00.0: amdgpu: ring jpeg_dec uses VM inv eng 8 on hub 8
amdgpu 0000:3d:00.0: amdgpu: Using BACO for runtime pm
[drm] Initialized amdgpu 3.54.0 20150101 for 0000:3d:00.0 on minor 1
fbcon: amdgpudrmfb (fb0) is primary device
fbcon: Deferring console take-over
amdgpu 0000:3d:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[drm] DSC precompute is not needed.
kauditd_printk_skb: 113 callbacks suppressed
audit: type=1130 audit(1700837109.545:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1700837109.580:75): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1700837109.586:76): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1700837109.592:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1700837109.606:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1700837109.612:79): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1700837109.620:80): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1700837109.629:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1700837109.642:82): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1700837109.655:83): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[510]: Received SIGTERM from PID 1 (systemd).
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=1
SELinux: policy capability ioctl_skip_cloexec=0
systemd[1]: Successfully loaded SELinux policy in 78.370ms.
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
systemd[1]: Relabeled /dev, /dev/shm, /run, /sys/fs/cgroup in 36.744ms.
systemd[1]: systemd 254.5-2.fc39 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: bpf-lsm: LSM BPF program attached
zram: Added device: zram0
systemd[1]: initrd-switch-root.service: Deactivated successfully.
systemd[1]: Stopped initrd-switch-root.service - Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice machine.slice - Virtual Machine and Container Slice.
systemd[1]: Created slice system-akmods\x2dkeygen.slice - Slice /system/akmods-keygen.
systemd[1]: Created slice system-getty.slice - Slice /system/getty.
systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice - Slice /system/systemd-zram-setup.
systemd[1]: Created slice user.slice - User and Session Slice.
systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
systemd[1]: Reached target getty.target - Login Prompts.
systemd[1]: Stopped target initrd-switch-root.target - Switch Root.
systemd[1]: Stopped target initrd-fs.target - Initrd File Systems.
systemd[1]: Stopped target initrd-root-fs.target - Initrd Root File System.
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Listening on systemd-userdbd.socket - User Database Manager Socket.
systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
systemd[1]: plymouth-switch-root.service: Deactivated successfully.
loop: module loaded
systemd[1]: Stopped plymouth-switch-root.service - Plymouth switch root service.
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line...
systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
systemd-journald[909]: Collecting audit messages is enabled.
EXT4-fs (nvme0n1p2): re-mounted 77912ad4-ac6d-4191-9403-e7833e0d9cbe r/w. Quota mode: none.
systemd-journald[909]: /run/log/journal/79ba7527e1a64f5dbb7b974818682ba5/system.journal: Realtime clock jumped backwards relative to last journal entry, rotating.
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
systemd[1]: Started systemd-journald.service - Journal Service.
zram0: detected capacity change from 0 to 16777216
mc: Linux media interface: v0.10
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
input: PC Speaker as /devices/platform/pcspkr/input/input27
ACPI: bus type thunderbolt registered
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
videodev: Linux video capture interface: v2.00
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-16 Joules
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: SFUN value: 0x1
asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
asus_wmi: Failed to get WMI notify code: AE_NOT_FOUND
asus_wmi: Failed to get event during flush: -5
asus_wmi: SFUN value: 0x1
eeepc-wmi eeepc-wmi: Detected ATK, not ASUSWMI, use DSTS
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input28
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input29
Adding 3585020k swap on /dev/nvme1n1p6. Priority:-2 extents:1 across:3585020k SSFS
BTRFS info (device sda1): using crc32c (crc32c-intel) checksum algorithm
BTRFS info (device sda1): using free space tree
Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDscFS
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
kvm_amd: TSC scaling supported
kvm_amd: Nested Virtualization enabled
kvm_amd: Nested Paging enabled
kvm_amd: Virtual VMLOAD VMSAVE supported
kvm_amd: Virtual GIF supported
kvm_amd: LBR virtualization supported
usb 2-1: Found UVC 1.00 device Logitech BRIO (046d:085e)
MCE: In-kernel MCE decoding enabled.
usbcore: registered new interface driver uvcvideo
usbcore: registered new interface driver btusb
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
snd_hda_intel 0000:3d:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:3d:00.1: Force to non-snoop mode
snd_hda_intel 0000:3f:00.4: enabling device (0000 -> 0002)
usb 2-1: current rate 16000 is different from the runtime rate 24000
usb 2-1: current rate 16000 is different from the runtime rate 32000
usb 2-1: current rate 16000 is different from the runtime rate 48000
usb 1-9: This Realtek USB WiFi dongle (0x2001:0x331b) is untested!
usb 1-9: Please report results to Jes.Sorensen@gmail.com
snd_hda_intel 0000:3d:00.1: bound 0000:3d:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:3b:00.0/0000:3c:00.0/0000:3d:00.1/sound/card0/input30
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:3b:00.0/0000:3c:00.0/0000:3d:00.1/sound/card0/input31
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:3b:00.0/0000:3c:00.0/0000:3d:00.1/sound/card0/input32
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:3b:00.0/0000:3c:00.0/0000:3d:00.1/sound/card0/input33
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:3b:00.0/0000:3c:00.0/0000:3d:00.1/sound/card0/input34
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:3b:00.0/0000:3c:00.0/0000:3d:00.1/sound/card0/input35
EXT4-fs (nvme0n1p3): mounted filesystem c5f065e8-a026-46d8-b7e5-65d6babebcc7 r/w with ordered data mode. Quota mode: none.
EXT4-fs (nvme1n1p5): mounted filesystem f2e0cc07-cc70-4cdf-a1a2-df6f4efa50f6 r/w with ordered data mode. Quota mode: none.
snd_hda_codec_realtek hdaudioC2D0: ALCS1200A: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALCS1200A: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC2D0: inputs:
snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
XFS (nvme0n1p4): Mounting V5 Filesystem 56cdc399-4cef-4144-9691-43b0723d80c9
XFS (sda2): Mounting V5 Filesystem 6a74faa3-b325-4496-a28d-59761b6572ab
mt7921e: probe of 0000:39:00.0 failed with error -22
XFS (nvme0n1p5): Mounting V5 Filesystem a6155ec3-1310-4183-a719-be0f0f574b8f
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:3f:00.4/sound/card2/input36
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:3f:00.4/sound/card2/input37
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:3f:00.4/sound/card2/input38
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:3f:00.4/sound/card2/input39
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:3f:00.4/sound/card2/input40
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:3f:00.4/sound/card2/input41
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:3f:00.4/sound/card2/input42
XFS (sdb1): Mounting V5 Filesystem a86b30f6-9a20-4263-a14d-a41490fccdb2
XFS (sdb2): Mounting V5 Filesystem e28be6aa-8ad4-4cff-9e04-a06edc9eb103
XFS (nvme0n1p5): Ending clean mount
XFS (sdb2): Ending clean mount
XFS (sdb1): Ending clean mount
XFS (nvme0n1p4): Ending clean mount
systemd-journald[909]: Received client request to flush runtime journal.
systemd-journald[909]: /var/log/journal/79ba7527e1a64f5dbb7b974818682ba5/system.journal: Journal file uses a different sequence number ID, rotating.
systemd-journald[909]: Rotating system journal.
systemd-journald[909]: /var/log/journal/79ba7527e1a64f5dbb7b974818682ba5/system.journal: Realtime clock jumped backwards relative to last journal entry, rotating.
systemd-journald[909]: Rotating system journal.
XFS (sda2): Ending clean mount
usb 1-2.1: 1:3 : unsupported format bits 0x100000000
usbcore: registered new interface driver snd-usb-audio
usb 1-9: Dumping efuse for RTL8188EU (0x200 bytes):
00000000: 29 81 00 6c 0b 00 00 00 00 0c 00 00 00 00 00 00 )..l............
00000010: 2d 2d 2d 2d 2b 2b 31 31 31 31 2f 00 ff ff ff ff ----++1111/.....
00000020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000040: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000090: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
000000a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
000000b0: ff ff ff ff ff ff ff ff 26 20 1a 00 00 00 00 00 ........& ......
000000c0: 00 00 00 10 00 00 00 00 00 03 ff ff ff ff ff ff ................
000000d0: 01 20 1b 33 42 66 00 08 5a 11 32 9e 20 0a 03 52 . .3Bf..Z.2. ..R
000000e0: 65 61 6c 74 65 6b 0d 02 03 44 57 41 2d 31 32 31 ealtek...DWA-121
000000f0: 20 42 31 20 31 31 6e 20 41 64 61 70 74 65 72 00 B1 11n Adapter.
00000100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000110: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000120: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000130: 81 ae 96 2d 03 93 96 11 fc 8c 00 11 9b ff ff ff ...-............
00000140: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000150: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000160: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000170: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00000190: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
000001a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
000001b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
000001c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
000001d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
000001e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
000001f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
usb 1-9: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0
usb 1-9: RTL8188EU MAC: 08:5a:11:32:9e:20
usb 1-9: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin
usb 1-9: Firmware revision 28.0 (signature 0x88e1)
kauditd_printk_skb: 186 callbacks suppressed
audit: type=1130 audit(1700833515.826:206): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1700833515.838:207): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1700833515.872:208): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1700833516.503:209): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1334 audit(1700833516.522:210): prog-id=56 op=LOAD
audit: type=1300 audit(1700833516.522:210): arch=c000003e syscall=321 success=yes exit=56 a0=5 a1=7ffe9d4469f0 a2=90 a3=0 items=0 ppid=0 pid=1 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="systemd" exe="/usr/lib/systemd/systemd" subj=system_u:system_r:init_t:s0 key=(null)
audit: type=1327 audit(1700833516.522:210): proctitle=2F696E69740072686762
audit: type=1334 audit(1700833516.522:211): prog-id=57 op=LOAD
audit: type=1300 audit(1700833516.522:211): arch=c000003e syscall=321 success=yes exit=60 a0=5 a1=7ffe9d446a00 a2=90 a3=0 items=0 ppid=0 pid=1 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="systemd" exe="/usr/lib/systemd/systemd" subj=system_u:system_r:init_t:s0 key=(null)
audit: type=1327 audit(1700833516.522:211): proctitle=2F696E69740072686762
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp-with-tls transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
dbus-broker-lau[1669]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Loading of module with unavailable key is rejected
NET: Registered PF_QIPCRTR protocol family
RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-3a00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-3a00:00, irq=MAC)
r8169 0000:3a:00.0 enp58s0: Link is Down
usbcore: registered new interface driver rtl8xxxu
rtl8xxxu 1-9:1.0 wlp2s0f0u9: renamed from wlan0
r8169 0000:3a:00.0 enp58s0: Link is Up - 1Gbps/Full - flow control rx/tx
wlp2s0f0u9: authenticate with 92:8d:26:f9:49:d9
wlp2s0f0u9: 80 MHz not supported, disabling VHT
wlp2s0f0u9: send auth to 92:8d:26:f9:49:d9 (try 1/3)
wlp2s0f0u9: authenticated
wlp2s0f0u9: associate with 92:8d:26:f9:49:d9 (try 1/3)
wlp2s0f0u9: RX AssocResp from 92:8d:26:f9:49:d9 (capab=0x1411 status=0 aid=16)
usb 1-9: rtl8xxxu_bss_info_changed: HT supported
wlp2s0f0u9: associated
wlp2s0f0u9: Limiting TX power to 20 (20 - 0) dBm as advertised by 92:8d:26:f9:49:d9
IPv4: martian source 192.168.1.11 from 192.168.1.1, on dev wlp2s0f0u9
ll header: 00000000: 08 5a 11 32 9e 20 60 8d 26 f9 49 d6 08 00
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
warning: `QSampleCache::L' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
usb 2-1: current rate 16000 is different from the runtime rate 48000
usb 2-1: current rate 16000 is different from the runtime rate 48000
usb 2-1: current rate 16000 is different from the runtime rate 48000
Bluetooth: hci0: Device setup in 21119445 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: hci0: AOSP quality report is supported
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
systemd-journald[909]: /var/log/journal/79ba7527e1a64f5dbb7b974818682ba5/user-1000.journal: Journal file uses a different sequence number ID, rotating.
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
usb 2-1: current rate 16000 is different from the runtime rate 48000
usb 2-1: current rate 16000 is different from the runtime rate 48000
usb 2-1: current rate 16000 is different from the runtime rate 48000
logitech-hidpp-device 0003:046D:4085.0010: HID++ 4.2 device connected.
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp2s0f0u9: authenticate with 92:8d:26:f9:49:d9
wlp2s0f0u9: 80 MHz not supported, disabling VHT
wlp2s0f0u9: send auth to 92:8d:26:f9:49:d9 (try 1/3)
wlp2s0f0u9: send auth to 92:8d:26:f9:49:d9 (try 2/3)
wlp2s0f0u9: send auth to 92:8d:26:f9:49:d9 (try 3/3)
wlp2s0f0u9: authentication with 92:8d:26:f9:49:d9 timed out
wlp2s0f0u9: authenticate with 92:8d:26:f9:49:d9
wlp2s0f0u9: 80 MHz not supported, disabling VHT
wlp2s0f0u9: send auth to 92:8d:26:f9:49:d9 (try 1/3)
wlp2s0f0u9: authenticated
wlp2s0f0u9: associate with 92:8d:26:f9:49:d9 (try 1/3)
wlp2s0f0u9: RX AssocResp from 92:8d:26:f9:49:d9 (capab=0x1411 status=0 aid=32)
usb 1-9: rtl8xxxu_bss_info_changed: HT supported
wlp2s0f0u9: associated
wlp2s0f0u9: Limiting TX power to 20 (20 - 0) dBm as advertised by 92:8d:26:f9:49:d9
IPv4: martian source 192.168.1.11 from 192.168.1.1, on dev wlp2s0f0u9
ll header: 00000000: 08 5a 11 32 9e 20 60 8d 26 f9 49 d6 08 00
wlp2s0f0u9: deauthenticating from 92:8d:26:f9:49:d9 by local choice (Reason: 3=DEAUTH_LEAVING)
wlp2s0f0u9: authenticate with 3e:87:ba:9d:f7:af
wlp2s0f0u9: 80 MHz not supported, disabling VHT
wlp2s0f0u9: send auth to 3e:87:ba:9d:f7:af (try 1/3)
wlp2s0f0u9: authenticated
wlp2s0f0u9: associate with 3e:87:ba:9d:f7:af (try 1/3)
wlp2s0f0u9: RX AssocResp from 3e:87:ba:9d:f7:af (capab=0x1431 status=0 aid=17)
usb 1-9: rtl8xxxu_bss_info_changed: HT supported
wlp2s0f0u9: associated
wlp2s0f0u9: Limiting TX power to 20 (20 - 0) dBm as advertised by 3e:87:ba:9d:f7:af
IPv4: martian source 255.255.255.255 from 192.168.68.1, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 28 87 ba 9d f7 ab 08 00
IPv4: martian source 192.168.68.59 from 192.168.68.1, on dev wlp2s0f0u9
ll header: 00000000: 08 5a 11 32 9e 20 28 87 ba 9d f7 ab 08 00
IPv4: martian source 192.168.68.59 from 192.168.68.1, on dev wlp2s0f0u9
ll header: 00000000: 08 5a 11 32 9e 20 28 87 ba 9d f7 ab 08 00
IPv4: martian source 192.168.68.59 from 192.168.68.59, on dev enp58s0
ll header: 00000000: ff ff ff ff ff ff 08 5a 11 32 9e 20 08 06
IPv4: martian source 192.168.68.1 from 192.168.68.59, on dev enp58s0
ll header: 00000000: ff ff ff ff ff ff 08 5a 11 32 9e 20 08 06
IPv4: martian source 192.168.68.59 from 192.168.68.59, on dev enp58s0
ll header: 00000000: ff ff ff ff ff ff 08 5a 11 32 9e 20 08 06
IPv4: martian source 255.255.255.255 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 00
IPv4: martian source 192.168.68.59 from 192.168.68.59, on dev enp58s0
ll header: 00000000: ff ff ff ff ff ff 08 5a 11 32 9e 20 08 06
IPv4: martian source 192.168.68.57 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.57 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.57 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.57 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.57 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.57 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.57 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.57 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.57 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.60 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.60 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
IPv4: martian source 192.168.68.59 from 192.168.68.59, on dev enp58s0
ll header: 00000000: ff ff ff ff ff ff 08 5a 11 32 9e 20 08 06
IPv4: martian source 192.168.68.59 from 192.168.68.59, on dev enp58s0
ll header: 00000000: ff ff ff ff ff ff 08 5a 11 32 9e 20 08 06
IPv4: martian source 192.168.68.59 from 192.168.68.59, on dev enp58s0
ll header: 00000000: ff ff ff ff ff ff 08 5a 11 32 9e 20 08 06
IPv4: martian source 192.168.68.59 from 192.168.68.59, on dev enp58s0
ll header: 00000000: ff ff ff ff ff ff 08 5a 11 32 9e 20 08 06
IPv4: martian source 192.168.68.60 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.60 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.59 from 192.168.68.59, on dev enp58s0
ll header: 00000000: ff ff ff ff ff ff 08 5a 11 32 9e 20 08 06
IPv4: martian source 192.168.68.60 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.60 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
IPv4: martian source 192.168.68.59 from 192.168.68.59, on dev enp58s0
ll header: 00000000: ff ff ff ff ff ff 08 5a 11 32 9e 20 08 06
IPv4: martian source 192.168.68.60 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.60 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
usb 1-2.1: USB disconnect, device number 5
IPv4: martian source 192.168.68.59 from 192.168.68.59, on dev enp58s0
ll header: 00000000: ff ff ff ff ff ff 08 5a 11 32 9e 20 08 06
IPv4: martian source 192.168.68.59 from 192.168.68.59, on dev enp58s0
ll header: 00000000: ff ff ff ff ff ff 08 5a 11 32 9e 20 08 06
IPv4: martian source 192.168.68.60 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
IPv4: martian source 192.168.68.60 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
usb 1-1: new high-speed USB device number 14 using xhci_hcd
usb 1-1: New USB device found, idVendor=046d, idProduct=085e, bcdDevice= 0.17
usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=3
usb 1-1: Product: Logitech BRIO
usb 1-1: SerialNumber: 3172AEB0
usb 1-1: Found UVC 1.00 device Logitech BRIO (046d:085e)
usb 2-1: USB disconnect, device number 2
usb 1-1: current rate 16000 is different from the runtime rate 24000
usb 1-1: current rate 16000 is different from the runtime rate 32000
usb 1-1: current rate 16000 is different from the runtime rate 48000
usb 1-1: current rate 16000 is different from the runtime rate 48000
usb 1-1: current rate 16000 is different from the runtime rate 48000
usb 1-1: current rate 16000 is different from the runtime rate 48000
IPv4: martian source 192.168.68.59 from 192.168.68.59, on dev enp58s0
ll header: 00000000: ff ff ff ff ff ff 08 5a 11 32 9e 20 08 06
IPv4: martian source 192.168.68.60 from 192.168.68.60, on dev wlp2s0f0u9
ll header: 00000000: ff ff ff ff ff ff 50 eb f6 29 4f 7a 08 06
usb 1-2.1: new high-speed USB device number 15 using xhci_hcd
usb 1-2.1: New USB device found, idVendor=152a, idProduct=85dd, bcdDevice= 1.04
usb 1-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-2.1: Product: SMSL USB AUDIO
usb 1-2.1: Manufacturer: SMSL
usb 1-2.1: 1:3 : unsupported format bits 0x100000000
usb 1-2.1: 1:1: usb_set_interface failed (-71)
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: uac_clock_source_is_valid(): cannot get clock validity for id 41
usb 1-2.1: clock source 41 is not valid, cannot use
usb 1-2.1: USB disconnect, device number 15